- Home /
- Testing & Analysis /
- EMC Testing /
- Electrical Fast Transient Generator Calibration
Electrical Fast Transient Generator Calibration
We provide calibration services for Electrical Fast Transient Generators. This calibration provides 50 Ohm and 1,000 Ohm impedance network waveform data that is compared to the requirements listed in IEC 61000-4-4, basic standard.
This table describes our scope of accreditation for electrical fast transient generator calibrations:
50 Ohm Circuit
| Parameter/Equipment | Range | Best Uncertainty (±) | Comments |
|---|---|---|---|
| Amplitude | (0.250 to 4) kV | 4.23% | IEC 61000-4-4 |
| Rise Time | 5 μs ± 30 % | 4.40% | IEC 61000-4-4 |
| Pulse Width | 50 μs ± 30 % | 4.40% | IEC 61000-4-4 |
| Burst Period | 15ms | 3.50% | IEC 61000-4-4 |
1k Ohm Circuit
| Parameter/Equipment | Range | Best Uncertainty (±) | Comments |
|---|---|---|---|
| Amplitude | (0.250 to 4) kV | 4.29% | IEC 61000-4-4 |
| Rise Time | 5 μs ± 30 % | 4.35% | IEC 61000-4-4 |
| Pulse Width | 50 μs ± 30 % | 4.40% | IEC 61000-4-4 |
| Bust Period | 15ms | 3.58% | IEC 61000-4-4 |
- Antenna Calibration
- Attenuator Calibration
- Calibration Services for Measuring Test Equipment
- Coupling-Decoupling Networks Calibration
- Electrical Fast Transient Generator Calibration
- Electrostatic Discharge Generator Calibration
- LISN Calibration
- RF Pre-Amplifier Calibration
- Surge Generator Calibration
- Voltage Probe Calibration
- FAQ - Calibration