- Home /
- Testing & Analysis /
- EMC Testing /
- Electrostatic Discharge Generator Calibration
Electrostatic Discharge Generator Calibration
Intertek provides calibration services for Electrostatic Discharge Generators.This calibration provides contact discharge waveform data that is compared to the requirements listed in IEC 61000-4-2, the basic standard .
The table shown below describes our scope of accreditation for electrostatic discharge generator calibrations:
Parameter/Equipment | Range | Best Uncertainty (±) | Comments |
---|---|---|---|
ESD - | IEC 61000-4-2 TDS 680B scope MD 102 target 20dB attenuator | ||
Contact Discharge (+/-) | (2 to 8) kV | 4.3% | |
Rise Time | (0.7 to 1) ns | 5.7% | |
Peak Current | (6 to 34) A | 4.3% | |
30 ns Current | (2 to 21) A | 4.7% | |
60 ns Current | (1.5 to 10.5) A | 4.4% | |
Indicated Voltage | (2 to 25) kV | 4.3% |
- Antenna Calibration
- Attenuator Calibration
- Calibration Services for Measuring Test Equipment
- Coupling-Decoupling Networks Calibration
- Electrical Fast Transient Generator Calibration
- Electrostatic Discharge Generator Calibration
- LISN Calibration
- RF Pre-Amplifier Calibration
- Surge Generator Calibration
- Voltage Probe Calibration
- FAQ - Calibration